[Contrib] [RFC Index] [RFC 2600 - 2699]    RFC 2633: S/MIME Version 3 Message Specification

RFC 2633: S/MIME Version 3 Message Specification   Network Working Group B. Ramsdell, Editor Request for Comments: 2633 Worldtalk Category: Standards Track June 1999 S/MIME Version 3 Message Specification Status of this Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. Copyright Notice Copyright (C) The Internet Society (1999). All Rights Reserved. 1. Introduction S/MIME (Secure/Multipurpose Internet Mail Extensions) provides a consistent way to send and receive secure MIME data. Based on the popular Internet MIME standard, S/MIME provides the following cryptographic security services for electronic messaging applications: authentication, message integrity and non-repudiation of origin (using digital signatures) and privacy and data security (using encryption). S/MIME can be used by traditional mail user agents (MUAs) to add cryptographic security services to mail that is sent, and to interpret cryptographic security services in mail that is received. However, S/MIME is not restricted to mail; it can be used with any transport mechanism that transports MIME data, such as HTTP. As such, S/MIME takes advantage of the object-based features of MIME and allows secure messages to be exchanged in mixed-transport systems. Further, S/MIME can be used in automated message transfer agents that use cryptographic security services that do not require any human intervention, such as the signing of software-generated documents and the encryption of FAX messages sent over the Internet. 1.1 Specification Overview This document describes a protocol for adding cryptographic signature and encryption services to MIME data. The MIME standard [MIME-SPEC] provides a general structure for the content type of Internet messages and allows extensions for new content type applications. Ramsdell Standards Track [Page 1] RFC 2633 S/MIME Version 3 Message Specification June 1999 This memo defines how to create a MIME body part that has been cryptographically enhanced according to CMS [CMS], which is derived from PKCS #7 [PKCS-7]. This memo also defines the application/pkcs7- mime MIME type that can be used to transport those body parts. This memo also discusses how to use the multipart/signed MIME type defined in [MIME-SECURE] to transport S/MIME signed messages. This memo also defines the application/pkcs7-signature MIME type, which is also used to transport S/MIME signed messages. In order to create S/MIME messages, an S/MIME agent has to follow specifications in this memo, as well as the specifications listed in the Cryptographic Message Syntax [CMS]. Throughout this memo, there are requirements and recommendations made for how receiving agents handle incoming messages. There are separate requirements and recommendations for how sending agents create outgoing messages. In general, the best strategy is to "be liberal in what you receive and conservative in what you send". Most of the requirements are placed on the handling of incoming messages while the recommendations are mostly on the creation of outgoing messages. The separation for requirements on receiving agents and sending agents also derives from the likelihood that there will be S/MIME systems that involve software other than traditional Internet mail clients. S/MIME can be used with any system that transports MIME data. An automated process that sends an encrypted message might not be able to receive an encrypted message at all, for example. Thus, the requirements and recommendations for the two types of agents are listed separately when appropriate. 1.2 Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [MUSTSHOULD]. 1.3 Definitions For the purposes of this memo, the following definitions apply. ASN.1: Abstract Syntax Notation One, as defined in CCITT X.208. BER: Basic Encoding Rules for ASN.1, as defined in CCITT X.209. Certificate: A type that binds an entity's distinguished name to a public key with a digital signature. Ramsdell Standards Track [Page 2] RFC 2633 S/MIME Version 3 Message Specification June 1999 DER: Distinguished Encoding Rules for ASN.1, as defined in CCITT X.509. 7-bit data: Text data with lines less than 998 characters long, where none of the characters have the 8th bit set, and there are no NULL characters. <CR> and <LF> occur only as part of a <CR><LF> end of line delimiter. 8-bit data: Text data with lines less than 998 characters, and where none of the characters are NULL characters. <CR> and <LF> occur only as part of a <CR><LF> end of line delimiter. Binary data: Arbitrary data. Transfer Encoding: A reversible transformation made on data so 8-bit or binary data may be sent via a channel that only transmits 7-bit data. Receiving agent: software that interprets and processes S/MIME CMS objects, MIME body parts that contain CMS objects, or both. Sending agent: software that creates S/MIME CMS objects, MIME body parts that contain CMS objects, or both. S/MIME agent: user software that is a receiving agent, a sending agent, or both. 1.4 Compatibility with Prior Practice of S/MIME S/MIME version 3 agents should attempt to have the greatest interoperability possible with S/MIME version 2 agents. S/MIME version 2 is described in RFC 2311 through RFC 2315, inclusive. RFC 2311 also has historical information about the development of S/MIME. 2. CMS Options CMS allows for a wide variety of options in content and algorithm support. This section puts forth a number of support requirements and recommendations in order to achieve a base level of interoperability among all S/MIME implementations. [CMS] provides additional details regarding the use of the cryptographic algorithms. 2.1 DigestAlgorithmIdentifier Sending and receiving agents MUST support SHA-1 [SHA1]. Receiving agents SHOULD support MD5 [MD5] for the purpose of providing backward compatibility with MD5-digested S/MIME v2 SignedData objects. Ramsdell Standards Track [Page 3] RFC 2633 S/MIME Version 3 Message Specification June 1999 2.2 SignatureAlgorithmIdentifier Sending and receiving agents MUST support id-dsa defined in [DSS]. The algorithm parameters MUST be absent (not encoded as NULL). Receiving agents SHOULD support rsaEncryption, defined in [PKCS-1]. Sending agents SHOULD support rsaEncryption. Outgoing messages are signed with a user's private key. The size of the private key is determined during key generation. Note that S/MIME v2 clients are only capable of verifying digital signatures using the rsaEncryption algorithm. 2.3 KeyEncryptionAlgorithmIdentifier Sending and receiving agents MUST support Diffie-Hellman defined in [DH]. Receiving agents SHOULD support rsaEncryption. Incoming encrypted messages contain symmetric keys which are to be decrypted with a user's private key. The size of the private key is determined during key generation. Sending agents SHOULD support rsaEncryption. Note that S/MIME v2 clients are only capable of decrypting content encryption keys using the rsaEncryption algorithm. 2.4 General Syntax CMS defines multiple content types. Of these, only the Data, SignedData, and EnvelopedData content types are currently used for S/MIME. 2.4.1 Data Content Type Sending agents MUST use the id-data content type identifier to indicate the message content which has had security services applied to it. For example, when applying a digital signature to MIME data, the CMS signedData encapContentInfo eContentType MUST include the id-data object identifier and the MIME content MUST be stored in the SignedData encapContentInfo eContent OCTET STRING (unless the sending agent is using multipart/signed, in which case the eContent is absent, per section 3.4.3 of this document). As another example, when applying encryption to MIME data, the CMS EnvelopedData Ramsdell Standards Track [Page 4] RFC 2633 S/MIME Version 3 Message Specification June 1999 encryptedContentInfo ContentType MUST include the id-data object identifier and the encrypted MIME content MUST be stored in the envelopedData encryptedContentInfo encryptedContent OCTET STRING. 2.4.2 SignedData Content Type Sending agents MUST use the signedData content type to apply a digital signature to a message or, in a degenerate case where there is no signature information, to convey certificates. 2.4.3 EnvelopedData Content Type This content type is used to apply privacy protection to a message. A sender needs to have access to a public key for each intended message recipient to use this service. This content type does not provide authentication. 2.5 Attribute SignerInfo Type The SignerInfo type allows the inclusion of unsigned and signed attributes to be included along with a signature. Receiving agents MUST be able to handle zero or one instance of each of the signed attributes listed here. Sending agents SHOULD generate one instance of each of the following signed attributes in each S/MIME message: - signingTime (section 2.5.1 in this document) - sMIMECapabilities (section 2.5.2 in this document) - sMIMEEncryptionKeyPreference (section 2.5.3 in this document) Further, receiving agents SHOULD be able to handle zero or one instance in the signed attributes of the signingCertificate attribute (section 5 in [ESS]). Sending agents SHOULD generate one instance of the signingCertificate signed attribute in each S/MIME message. Additional attributes and values for these attributes may be defined in the future. Receiving agents SHOULD handle attributes or values that it does not recognize in a graceful manner. Sending agents that include signed attributes that are not listed here SHOULD display those attributes to the user, so that the user is aware of all of the data being signed. Ramsdell Standards Track [Page 5] RFC 2633 S/MIME Version 3 Message Specification June 1999 2.5.1 Signing-Time Attribute The signing-time attribute is used to convey the time that a message was signed. Until there are trusted timestamping services, the time of signing will most likely be created by a message originator and therefore is only as trustworthy as the originator. Sending agents MUST encode signing time through the year 2049 as UTCTime; signing times in 2050 or later MUST be encoded as GeneralizedTime. When the UTCTime CHOICE is used, S/MIME agents MUST interpret the year field (YY) as follows: if YY is greater than or equal to 50, the year is interpreted as 19YY; if YY is less than 50, the year is interpreted as 20YY. 2.5.2 SMIMECapabilities Attribute The SMIMECapabilities attribute includes signature algorithms (such as "sha1WithRSAEncryption"), symmetric algorithms (such as "DES- EDE3-CBC"), and key encipherment algorithms (such as "rsaEncryption"). It also includes a non-algorithm capability which is the preference for signedData. The SMIMECapabilities were designed to be flexible and extensible so that, in the future, a means of identifying other capabilities and preferences such as certificates can be added in a way that will not cause current clients to break. If present, the SMIMECapabilities attribute MUST be a SignedAttribute; it MUST NOT be an UnsignedAttribute. CMS defines SignedAttributes as a SET OF Attribute. The SignedAttributes in a signerInfo MUST NOT include multiple instances of the SMIMECapabilities attribute. CMS defines the ASN.1 syntax for Attribute to include attrValues SET OF AttributeValue. A SMIMECapabilities attribute MUST only include a single instance of AttributeValue. There MUST NOT be zero or multiple instances of AttributeValue present in the attrValues SET OF AttributeValue. The semantics of the SMIMECapabilites attribute specify a partial list as to what the client announcing the SMIMECapabilites can support. A client does not have to list every capability it supports, and probably should not list all its capabilities so that the capabilities list doesn't get too long. In an SMIMECapabilities attribute, the OIDs are listed in order of their preference, but SHOULD be logically separated along the lines of their categories (signature algorithms, symmetric algorithms, key encipherment algorithms, etc.) Ramsdell Standards Track [Page 6] RFC 2633 S/MIME Version 3 Message Specification June 1999 The structure of the SMIMECapabilities attribute is to facilitate simple table lookups and binary comparisons in order to determine matches. For instance, the DER-encoding for the SMIMECapability for DES EDE3 CBC MUST be identically encoded regardless of the implementation. In the case of symmetric algorithms, the associated parameters for the OID MUST specify all of the parameters necessary to differentiate between two instances of the same algorithm. For instance, the number of rounds and block size for RC5 must be specified in addition to the key length. There is a list of OIDs (OIDs Used with S/MIME) that is centrally maintained and is separate from this memo. The list of OIDs is maintained by the Internet Mail Consortium at <http://www.imc.org/ietf-smime/oids.html>. Note that all OIDs associated with the MUST and SHOULD implement algorithms are included in section A of this document. The OIDs that correspond to algorithms SHOULD use the same OID as the actual algorithm, except in the case where the algorithm usage is ambiguous from the OID. For instance, in an earlier draft, rsaEncryption was ambiguous because it could refer to either a signature algorithm or a key encipherment algorithm. In the event that an OID is ambiguous, it needs to be arbitrated by the maintainer of the registered SMIMECapabilities list as to which type of algorithm will use the OID, and a new OID MUST be allocated under the smimeCapabilities OID to satisfy the other use of the OID. The registered SMIMECapabilities list specifies the parameters for OIDs that need them, most notably key lengths in the case of variable-length symmetric ciphers. In the event that there are no differentiating parameters for a particular OID, the parameters MUST be omitted, and MUST NOT be encoded as NULL. Additional values for the SMIMECapabilities attribute may be defined in the future. Receiving agents MUST handle a SMIMECapabilities object that has values that it does not recognize in a graceful manner. 2.5.3 Encryption Key Preference Attribute The encryption key preference attribute allows the signer to unambiguously describe which of the signer's certificates has the signer's preferred encryption key. This attribute is designed to enhance behavior for interoperating with those clients which use separate keys for encryption and signing. This attribute is used to Ramsdell Standards Track [Page 7] RFC 2633 S/MIME Version 3 Message Specification June 1999 convey to anyone viewing the attribute which of the listed certificates should be used for encrypting a session key for future encrypted messages. If present, the SMIMEEncryptionKeyPreference attribute MUST be a SignedAttribute; it MUST NOT be an UnsignedAttribute. CMS defines SignedAttributes as a SET OF Attribute. The SignedAttributes in a signerInfo MUST NOT include multiple instances of the SMIMEEncryptionKeyPreference attribute. CMS defines the ASN.1 syntax for Attribute to include attrValues SET OF AttributeValue. A SMIMEEncryptionKeyPreference attribute MUST only include a single instance of AttributeValue. There MUST NOT be zero or multiple instances of AttributeValue present in the attrValues SET OF AttributeValue. The sending agent SHOULD include the referenced certificate in the set of certificates included in the signed message if this attribute is used. The certificate may be omitted if it has been previously made available to the receiving agent. Sending agents SHOULD use this attribute if the commonly used or preferred encryption certificate is not the same as the certificate used to sign the message. Receiving agents SHOULD store the preference data if the signature on the message is valid and the signing time is greater than the currently stored value. (As with the SMIMECapabilities, the clock skew should be checked and the data not used if the skew is too great.) Receiving agents SHOULD respect the sender's encryption key preference attribute if possible. This however represents only a preference and the receiving agent may use any certificate in replying to the sender that is valid. 2.5.3.1 Selection of Recipient Key Management Certificate In order to determine the key management certificate to be used when sending a future CMS envelopedData message for a particular recipient, the following steps SHOULD be followed: - If an SMIMEEncryptionKeyPreference attribute is found in a signedData object received from the desired recipient, this identifies the X.509 certificate that should be used as the X.509 key management certificate for the recipient. - If an SMIMEEncryptionKeyPreference attribute is not found in a signedData object received from the desired recipient, the set of X.509 certificates should be searched for a X.509 certificate with the same subject name as the signing X.509 certificate which can be used for key management. Ramsdell Standards Track [Page 8] RFC 2633 S/MIME Version 3 Message Specification June 1999 - Or use some other method of determining the user's key management key. If a X.509 key management certificate is not found, then encryption cannot be done with the signer of the message. If multiple X.509 key management certificates are found, the S/MIME agent can make an arbitrary choice between them. 2.6 SignerIdentifier SignerInfo Type S/MIME v3 requires the use of SignerInfo version 1, that is the issuerAndSerialNumber CHOICE MUST be used for SignerIdentifier. 2.7 ContentEncryptionAlgorithmIdentifier Sending and receiving agents MUST support encryption and decryption with DES EDE3 CBC, hereinafter called "tripleDES" [3DES] [DES]. Receiving agents SHOULD support encryption and decryption using the RC2 [RC2] or a compatible algorithm at a key size of 40 bits, hereinafter called "RC2/40". 2.7.1 Deciding Which Encryption Method To Use When a sending agent creates an encrypted message, it has to decide which type of encryption to use. The decision process involves using information garnered from the capabilities lists included in messages received from the recipient, as well as out-of-band information such as private agreements, user preferences, legal restrictions, and so on. Section 2.5 defines a method by which a sending agent can optionally announce, among other things, its decrypting capabilities in its order of preference. The following method for processing and remembering the encryption capabilities attribute in incoming signed messages SHOULD be used. - If the receiving agent has not yet created a list of capabilities for the sender's public key, then, after verifying the signature on the incoming message and checking the timestamp, the receiving agent SHOULD create a new list containing at least the signing time and the symmetric capabilities. - If such a list already exists, the receiving agent SHOULD verify that the signing time in the incoming message is greater than the signing time stored in the list and that the signature is valid. If so, the receiving agent SHOULD update both the signing time and capabilities in the list. Values of the signing time that lie far in the future (that is, a greater discrepancy than any reasonable clock skew), or a capabilities list in messages whose signature could not be verified, MUST NOT be accepted. Ramsdell Standards Track [Page 9] RFC 2633 S/MIME Version 3 Message Specification June 1999 The list of capabilities SHOULD be stored for future use in creating messages. Before sending a message, the sending agent MUST decide whether it is willing to use weak encryption for the particular data in the message. If the sending agent decides that weak encryption is unacceptable for this data, then the sending agent MUST NOT use a weak algorithm such as RC2/40. The decision to use or not use weak encryption overrides any other decision in this section about which encryption algorithm to use. Sections 2.7.2.1 through 2.7.2.4 describe the decisions a sending agent SHOULD use in deciding which type of encryption should be applied to a message. These rules are ordered, so the sending agent SHOULD make its decision in the order given. 2.7.1.1 Rule 1: Known Capabilities If the sending agent has received a set of capabilities from the recipient for the message the agent is about to encrypt, then the sending agent SHOULD use that information by selecting the first capability in the list (that is, the capability most preferred by the intended recipient) for which the sending agent knows how to encrypt. The sending agent SHOULD use one of the capabilities in the list if the agent reasonably expects the recipient to be able to decrypt the message. 2.7.1.2 Rule 2: Unknown Capabilities, Known Use of Encryption If: - the sending agent has no knowledge of the encryption capabilities of the recipient, - and the sending agent has received at least one message from the recipient, - and the last encrypted message received from the recipient had a trusted signature on it, then the outgoing message SHOULD use the same encryption algorithm as was used on the last signed and encrypted message received from the recipient. Ramsdell Standards Track [Page 10] RFC 2633 S/MIME Version 3 Message Specification June 1999 2.7.1.3 Rule 3: Unknown Capabilities, Unknown Version of S/MIME If: - the sending agent has no knowledge of the encryption capabilities of the recipient, - and the sending agent has no knowledge of the version of S/MIME of the recipient, then the sending agent SHOULD use tripleDES because it is a stronger algorithm and is required by S/MIME v3. If the sending agent chooses not to use tripleDES in this step, it SHOULD use RC2/40. 2.7.2 Choosing Weak Encryption Like all algorithms that use 40 bit keys, RC2/40 is considered by many to be weak encryption. A sending agent that is controlled by a human SHOULD allow a human sender to determine the risks of sending data using RC2/40 or a similarly weak encryption algorithm before sending the data, and possibly allow the human to use a stronger encryption method such as tripleDES. 2.7.3 Multiple Recipients If a sending agent is composing an encrypted message to a group of recipients where the encryption capabilities of some of the recipients do not overlap, the sending agent is forced to send more than one message. It should be noted that if the sending agent chooses to send a message encrypted with a strong algorithm, and then send the same message encrypted with a weak algorithm, someone watching the communications channel may be able to learn the contents of the strongly-encrypted message simply by decrypting the weakly- encrypted message. 3. Creating S/MIME Messages This section describes the S/MIME message formats and how they are created. S/MIME messages are a combination of MIME bodies and CMS objects. Several MIME types as well as several CMS objects are used. The data to be secured is always a canonical MIME entity. The MIME entity and other data, such as certificates and algorithm identifiers, are given to CMS processing facilities which produces a CMS object. The CMS object is then finally wrapped in MIME. The Enhanced Security Services for S/MIME [ESS] document provides examples of how nested, secured S/MIME messages are formatted. ESS provides an example of how a triple-wrapped S/MIME message is formatted using multipart/signed and application/pkcs7-mime for the signatures. Ramsdell Standards Track [Page 11] RFC 2633 S/MIME Version 3 Message Specification June 1999 S/MIME provides one format for enveloped-only data, several formats for signed-only data, and several formats for signed and enveloped data. Several formats are required to accommodate several environments, in particular for signed messages. The criteria for choosing among these formats are also described. The reader of this section is expected to understand MIME as described in [MIME-SPEC] and [MIME-SECURE]. 3.1 Preparing the MIME Entity for Signing or Enveloping S/MIME is used to secure MIME entities. A MIME entity may be a sub- part, sub-parts of a message, or the whole message with all its sub- parts. A MIME entity that is the whole message includes only the MIME headers and MIME body, and does not include the RFC-822 headers. Note that S/MIME can also be used to secure MIME entities used in applications other than Internet mail. The MIME entity that is secured and described in this section can be thought of as the "inside" MIME entity. That is, it is the "innermost" object in what is possibly a larger MIME message. Processing "outside" MIME entities into CMS objects is described in Section 3.2, 3.4 and elsewhere. The procedure for preparing a MIME entity is given in [MIME-SPEC]. The same procedure is used here with some additional restrictions when signing. Description of the procedures from [MIME-SPEC] are repeated here, but the reader should refer to that document for the exact procedure. This section also describes additional requirements. A single procedure is used for creating MIME entities that are to be signed, enveloped, or both signed and enveloped. Some additional steps are recommended to defend against known corruptions that can occur during mail transport that are of particular importance for clear- signing using the multipart/signed format. It is recommended that these additional steps be performed on enveloped messages, or signed and enveloped messages in order that the message can be forwarded to any environment without modification. These steps are descriptive rather than prescriptive. The implementor is free to use any procedure as long as the result is the same. Step 1. The MIME entity is prepared according to the local conventions Step 2. The leaf parts of the MIME entity are converted to canonical form Ramsdell Standards Track [Page 12] RFC 2633 S/MIME Version 3 Message Specification June 1999 Step 3. Appropriate transfer encoding is applied to the leaves of the MIME entity When an S/MIME message is received, the security services on the message are processed, and the result is the MIME entity. That MIME entity is typically passed to a MIME-capable user agent where, it is further decoded and presented to the user or receiving application. 3.1.1 Canonicalization Each MIME entity MUST be converted to a canonical form that is uniquely and unambiguously representable in the environment where the signature is created and the environment where the signature will be verified. MIME entities MUST be canonicalized for enveloping as well as signing. The exact details of canonicalization depend on the actual MIME type and subtype of an entity, and are not described here. Instead, the standard for the particular MIME type should be consulted. For example, canonicalization of type text/plain is different from canonicalization of audio/basic. Other than text types, most types have only one representation regardless of computing platform or environment which can be considered their canonical representation. In general, canonicalization will be performed by the non-security part of the sending agent rather than the S/MIME implementation. The most common and important canonicalization is for text, which is often represented differently in different environments. MIME entities of major type "text" must have both their line endings and character set canonicalized. The line ending must be the pair of characters <CR><LF>, and the charset should be a registered charset [CHARSETS]. The details of the canonicalization are specified in [MIME-SPEC]. The chosen charset SHOULD be named in the charset parameter so that the receiving agent can unambiguously determine the charset used. Note that some charsets such as ISO-2022 have multiple representations for the same characters. When preparing such text for signing, the canonical representation specified for the charset MUST be used. 3.1.2 Transfer Encoding When generating any of the secured MIME entities below, except the signing using the multipart/signed format, no transfer encoding at all is required. S/MIME implementations MUST be able to deal with binary MIME objects. If no Content-Transfer-Encoding header is present, the transfer encoding should be considered 7BIT. Ramsdell Standards Track [Page 13] RFC 2633 S/MIME Version 3 Message Specification June 1999 S/MIME implementations SHOULD however use transfer encoding described in section 3.1.3 for all MIME entities they secure. The reason for securing only 7-bit MIME entities, even for enveloped data that are not exposed to the transport, is that it allows the MIME entity to be handled in any environment without changing it. For example, a trusted gateway might remove the envelope, but not the signature, of a message, and then forward the signed message on to the end recipient so that they can verify the signatures directly. If the transport internal to the site is not 8-bit clean, such as on a wide-area network with a single mail gateway, verifying the signature will not be possible unless the original MIME entity was only 7-bit data. 3.1.3 Transfer Encoding for Signing Using multipart/signed If a multipart/signed entity is EVER to be transmitted over the standard Internet SMTP infrastructure or other transport that is constrained to 7-bit text, it MUST have transfer encoding applied so that it is represented as 7-bit text. MIME entities that are 7-bit data already need no transfer encoding. Entities such as 8-bit text and binary data can be encoded with quoted-printable or base-64 transfer encoding. The primary reason for the 7-bit requirement is that the Internet mail transport infrastructure cannot guarantee transport of 8-bit or binary data. Even though many segments of the transport infrastructure now handle 8-bit and even binary data, it is sometimes not possible to know whether the transport path is 8-bit clear. If a mail message with 8-bit data were to encounter a message transfer agent that can not transmit 8-bit or binary data, the agent has three options, none of which are acceptable for a clear-signed message: - The agent could change the transfer encoding; this would invalidate the signature. - The agent could transmit the data anyway, which would most likely result in the 8th bit being corrupted; this too would invalidate the signature. - The agent could return the message to the sender. [MIME-SECURE] prohibits an agent from changing the transfer encoding of the first part of a multipart/signed message. If a compliant agent that can not transmit 8-bit or binary data encounters a multipart/signed message with 8-bit or binary data in the first part, it would have to return the message to the sender as undeliverable. Ramsdell Standards Track [Page 14] RFC 2633 S/MIME Version 3 Message Specification June 1999 3.1.4 Sample Canonical MIME Entity This example shows a multipart/mixed message with full transfer encoding. This message contains a text part and an attachment. The sample message text includes characters that are not US-ASCII and thus must be transfer encoded. Though not shown here, the end of each line is <CR><LF>. The line ending of the MIME headers, the text, and transfer encoded parts, all must be <CR><LF>. Note that this example is not of an S/MIME message. Content-Type: multipart/mixed; boundary=bar --bar Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable =A1Hola Michael! How do you like the new S/MIME specification? I agree. It's generally a good idea to encode lines that begin with From=20 because some mail transport agents will insert a greater-than (>) sign, thus invalidating the signature. Also, in some cases it might be desirable to encode any =20 trailing whitespace that occurs on lines in order to ensure =20 that the message signature is not invalidated when passing =20 a gateway that modifies such whitespace (like BITNET). =20 --bar Content-Type: image/jpeg Content-Transfer-Encoding: base64 iQCVAwUBMJrRF2N9oWBghPDJAQE9UQQAtl7LuRVndBjrk4EqYBIb3h5QXIX/LC// jJV5bNvkZIGPIcEmI5iFd9boEgvpirHtIREEqLQRkYNoBActFBZmh9GC3C041WGq uMbrbxc+nIs1TIKlA08rVi9ig/2Yh7LFrK5Ein57U/W72vgSxLhe/zhdfolT9Brn HOxEa44b+EI= --bar-- 3.2 The application/pkcs7-mime Type The application/pkcs7-mime type is used to carry CMS objects of several types including envelopedData and signedData. The details of constructing these entities is described in subsequent sections. This section describes the general characteristics of the application/pkcs7-mime type. Ramsdell Standards Track [Page 15] RFC 2633 S/MIME Version 3 Message Specification June 1999 The carried CMS object always contains a MIME entity that is prepared as described in section 3.1 if the eContentType is id-data. Other contents may be carried when the eContentType contains different values. See [ESS] for an example of this with signed receipts. Since CMS objects are binary data, in most cases base-64 transfer encoding is appropriate, in particular when used with SMTP transport. The transfer encoding used depends on the transport through which the object is to be sent, and is not a characteristic of the MIME type. Note that this discussion refers to the transfer encoding of the CMS object or "outside" MIME entity. It is completely distinct from, and unrelated to, the transfer encoding of the MIME entity secured by the CMS object, the "inside" object, which is described in section 3.1. Because there are several types of application/pkcs7-mime objects, a sending agent SHOULD do as much as possible to help a receiving agent know about the contents of the object without forcing the receiving agent to decode the ASN.1 for the object. The MIME headers of all application/pkcs7-mime objects SHOULD include the optional "smime- type" parameter, as described in the following sections. 3.2.1 The name and filename Parameters For the application/pkcs7-mime, sending agents SHOULD emit the optional "name" parameter to the Content-Type field for compatibility with older systems. Sending agents SHOULD also emit the optional Content-Disposition field [CONTDISP] with the "filename" parameter. If a sending agent emits the above parameters, the value of the parameters SHOULD be a file name with the appropriate extension: MIME Type File Extension Application/pkcs7-mime (signedData, .p7m envelopedData) Application/pkcs7-mime (degenerate .p7c signedData "certs-only" message) Application/pkcs7-signature .p7s In addition, the file name SHOULD be limited to eight characters followed by a three letter extension. The eight character filename base can be any distinct name; the use of the filename base "smime" SHOULD be used to indicate that the MIME entity is associated with S/MIME. Ramsdell Standards Track [Page 16] RFC 2633 S/MIME Version 3 Message Specification June 1999 Including a file name serves two purposes. It facilitates easier use of S/MIME objects as files on disk. It also can convey type information across gateways. When a MIME entity of type application/pkcs7-mime (for example) arrives at a gateway that has no special knowledge of S/MIME, it will default the entity's MIME type to application/octet-stream and treat it as a generic attachment, thus losing the type information. However, the suggested filename for an attachment is often carried across a gateway. This often allows the receiving systems to determine the appropriate application to hand the attachment off to, in this case a stand-alone S/MIME processing application. Note that this mechanism is provided as a convenience for implementations in certain environments. A proper S/MIME implementation MUST use the MIME types and MUST NOT rely on the file extensions. 3.2.2 The smime-type parameter The application/pkcs7-mime content type defines the optional "smime- type" parameter. The intent of this parameter is to convey details about the security applied (signed or enveloped) along with infomation about the contained content. This memo defines the following smime-types. Name Security Inner Content enveloped-data EnvelopedData id-data signed-data SignedData id-data certs-only SignedData none In order that consistency can be obtained with future, the following guidelines should be followed when assigning a new smime-type parameter. 1. If both signing and encryption can be applied to the content, then two values for smime-type SHOULD be assigned "signed-*" and "encrypted-*". If one operation can be assigned then this may be omitted. Thus since "certs-only" can only be signed, "signed-" is omitted. 2. A common string for a content oid should be assigned. We use "data" for the id-data content OID when MIME is the inner content. 3. If no common string is assigned. Then the common string of "OID.<oid>" is recommended (for example, "OID.1.3.6.1.5.5.7.6.1" would be DES40). Ramsdell Standards Track [Page 17] RFC 2633 S/MIME Version 3 Message Specification June 1999 3.3 Creating an Enveloped-only Message This section describes the format for enveloping a MIME entity without signing it. It is important to note that sending enveloped but not signed messages does not provide for data integrity. It is possible to replace ciphertext in such a way that the processed message will still be valid, but the meaning may be altered. Step 1. The MIME entity to be enveloped is prepared according to section 3.1. Step 2. The MIME entity and other required data is processed into a CMS object of type envelopedData. In addition to encrypting a copy of the content-encryption key for each recipient, a copy of the content encryption key SHOULD be encrypted for the originator and included in the envelopedData (see CMS Section 6). Step 3. The CMS object is inserted into an application/pkcs7-mime MIME entity. The smime-type parameter for enveloped-only messages is "enveloped- data". The file extension for this type of message is ".p7m". A sample message would be: Content-Type: application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename=smime.p7m rfvbnj756tbBghyHhHUujhJhjH77n8HHGT9HG4VQpfyF467GhIGfHfYT6 7n8HHGghyHhHUujhJh4VQpfyF467GhIGfHfYGTrfvbnjT6jH7756tbB9H f8HHGTrfvhJhjH776tbB9HG4VQbnj7567GhIGfHfYT6ghyHhHUujpfyF4 0GhIGfHfQbnj756YT64V 3.4 Creating a Signed-only Message There are two formats for signed messages defined for S/MIME: application/pkcs7-mime with SignedData, and multipart/signed. In general, the multipart/signed form is preferred for sending, and receiving agents SHOULD be able to handle both. Ramsdell Standards Track [Page 18] RFC 2633 S/MIME Version 3 Message Specification June 1999 3.4.1 Choosing a Format for Signed-only Messages There are no hard-and-fast rules when a particular signed-only format should be chosen because it depends on the capabilities of all the receivers and the relative importance of receivers with S/MIME facilities being able to verify the signature versus the importance of receivers without S/MIME software being able to view the message. Messages signed using the multipart/signed format can always be viewed by the receiver whether they have S/MIME software or not. They can also be viewed whether they are using a MIME-native user agent or they have messages translated by a gateway. In this context, "be viewed" means the ability to process the message essentially as if it were not a signed message, including any other MIME structure the message might have. Messages signed using the signedData format cannot be viewed by a recipient unless they have S/MIME facilities. However, if they have S/MIME facilities, these messages can always be verified if they were not changed in transit. 3.4.2 Signing Using application/pkcs7-mime with SignedData This signing format uses the application/pkcs7-mime MIME type. The steps to create this format are: Step 1. The MIME entity is prepared according to section 3.1 Step 2. The MIME entity and other required data is processed into a CMS object of type signedData Step 3. The CMS object is inserted into an application/pkcs7-mime MIME entity The smime-type parameter for messages using application/pkcs7-mime with SignedData is "signed-data". The file extension for this type of message is ".p7m". A sample message would be: Content-Type: application/pkcs7-mime; smime-type=signed-data; name=smime.p7m Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename=smime.p7m Ramsdell Standards Track [Page 19] RFC 2633 S/MIME Version 3 Message Specification June 1999 567GhIGfHfYT6ghyHhHUujpfyF4f8HHGTrfvhJhjH776tbB9HG4VQbnj7 77n8HHGT9HG4VQpfyF467GhIGfHfYT6rfvbnj756tbBghyHhHUujhJhjH HUujhJh4VQpfyF467GhIGfHfYGTrfvbnjT6jH7756tbB9H7n8HHGghyHh 6YT64V0GhIGfHfQbnj75 3.4.3 Signing Using the multipart/signed Format This format is a clear-signing format. Recipients without any S/MIME or CMS processing facilities are able to view the message. It makes use of the multipart/signed MIME type described in [MIME-SECURE]. The multipart/signed MIME type has two parts. The first part contains the MIME entity that is signed; the second part contains the "detached signature" CMS SignedData object in which the encapContentInfo eContent field is absent. 3.4.3.1 The application/pkcs7-signature MIME Type This MIME type always contains a single CMS object of type signedData. The signedData encapContentInfo eContent field MUST be absent. The signerInfos field contains the signatures for the MIME entity. The file extension for signed-only messages using application/pkcs7- signature is ".p7s". 3.4.3.2 Creating a multipart/signed Message Step 1. The MIME entity to be signed is prepared according to section 3.1, taking special care for clear-signing. Step 2. The MIME entity is presented to CMS processing in order to obtain an object of type signedData in which the encapContentInfo eContent field is absent. Step 3. The MIME entity is inserted into the first part of a multipart/signed message with no processing other than that described in section 3.1. Step 4. Transfer encoding is applied to the "detached signature" CMS SignedData object and it is inserted into a MIME entity of type application/pkcs7-signature. Step 5. The MIME entity of the application/pkcs7-signature is inserted into the second part of the multipart/signed entity. The multipart/signed Content type has two required parameters: the protocol parameter and the micalg parameter. Ramsdell Standards Track [Page 20] RFC 2633 S/MIME Version 3 Message Specification June 1999 The protocol parameter MUST be "application/pkcs7-signature". Note that quotation marks are required around the protocol parameter because MIME requires that the "/" character in the parameter value MUST be quoted. The micalg parameter allows for one-pass processing when the signature is being verified. The value of the micalg parameter is dependent on the message digest algorithm(s) used in the calculation of the Message Integrity Check. If multiple message digest algorithms are used they MUST be separated by commas per [MIME-SECURE]. The values to be placed in the micalg parameter SHOULD be from the following: Algorithm Value used MD5 md5 SHA-1 sha1 Any other unknown (Historical note: some early implementations of S/MIME emitted and expected "rsa-md5" and "rsa-sha1" for the micalg parameter.) Receiving agents SHOULD be able to recover gracefully from a micalg parameter value that they do not recognize. 3.4.3.3 Sample multipart/signed Message Content-Type: multipart/signed; protocol="application/pkcs7-signature"; micalg=sha1; boundary=boundary42 --boundary42 Content-Type: text/plain This is a clear-signed message. --boundary42 Content-Type: application/pkcs7-signature; name=smime.p7s Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename=smime.p7s ghyHhHUujhJhjH77n8HHGTrfvbnj756tbB9HG4VQpfyF467GhIGfHfYT6 4VQpfyF467GhIGfHfYT6jH77n8HHGghyHhHUujhJh756tbB9HGTrfvbnj n8HHGTrfvhJhjH776tbB9HG4VQbnj7567GhIGfHfYT6ghyHhHUujpfyF4 7GhIGfHfYT64VQbnj756 --boundary42-- Ramsdell Standards Track [Page 21] RFC 2633 S/MIME Version 3 Message Specification June 1999 3.5 Signing and Encrypting To achieve signing and enveloping, any of the signed-only and encrypted-only formats may be nested. This is allowed because the above formats are all MIME entities, and because they all secure MIME entities. An S/MIME implementation MUST be able to receive and process arbitrarily nested S/MIME within reasonable resource limits of the recipient computer. It is possible to either sign a message first, or to envelope the message first. It is up to the implementor and the user to choose. When signing first, the signatories are then securely obscured by the enveloping. When enveloping first the signatories are exposed, but it is possible to verify signatures without removing the enveloping. This may be useful in an environment were automatic signature verification is desired, as no private key material is required to verify a signature. There are security ramifications to choosing whether to sign first or encrypt first. A recipient of a message that is encrypted and then signed can validate that the encrypted block was unaltered, but cannot determine any relationship between the signer and the unencrypted contents of the message. A recipient of a message that is signed-then-encrypted can assume that the signed message itself has not been altered, but that a careful attacker may have changed the unauthenticated portions of the encrypted message. 3.6 Creating a Certificates-only Message The certificates only message or MIME entity is used to transport certificates, such as in response to a registration request. This format can also be used to convey CRLs. Step 1. The certificates are made available to the CMS generating process which creates a CMS object of type signedData. The signedData encapContentInfo eContent field MUST be absent and signerInfos field MUST be empty. Step 2. The CMS signedData object is enclosed in an application/pkcs7-mime MIME entity The smime-type parameter for a certs-only message is "certs-only". The file extension for this type of message is ".p7c". Ramsdell Standards Track [Page 22] RFC 2633 S/MIME Version 3 Message Specification June 1999 3.7 Registration Requests A sending agent that signs messages MUST have a certificate for the signature so that a receiving agent can verify the signature. There are many ways of getting certificates, such as through an exchange with a certificate authority, through a hardware token or diskette, and so on. S/MIME v2 [SMIMEV2] specified a method for "registering" public keys with certificate authorities using an application/pkcs10 body part. The IETF's PKIX Working Group is preparing another method for requesting certificates; however, that work was not finished at the time of this memo. S/MIME v3 does not specify how to request a certificate, but instead mandates that every sending agent already has a certificate. Standardization of certificate management is being pursued separately in the IETF. 3.8 Identifying an S/MIME Message Because S/MIME takes into account interoperation in non-MIME environments, several different mechanisms are employed to carry the type information, and it becomes a bit difficult to identify S/MIME messages. The following table lists criteria for determining whether or not a message is an S/MIME message. A message is considered an S/MIME message if it matches any below. The file suffix in the table below comes from the "name" parameter in the content-type header, or the "filename" parameter on the content- disposition header. These parameters that give the file suffix are not listed below as part of the parameter section. MIME type: application/pkcs7-mime parameters: any file suffix: any MIME type: multipart/signed parameters: protocol="application/pkcs7-signature" file suffix: any MIME type: application/octet-stream parameters: any file suffix: p7m, p7s, p7c Ramsdell Standards Track [Page 23] RFC 2633 S/MIME Version 3 Message Specification June 1999 4. Certificate Processing A receiving agent MUST provide some certificate retrieval mechanism in order to gain access to certificates for recipients of digital envelopes. This memo does not cover how S/MIME agents handle certificates, only what they do after a certificate has been validated or rejected. S/MIME certification issues are covered in [CERT3]. At a minimum, for initial S/MIME deployment, a user agent could automatically generate a message to an intended recipient requesting that recipient's certificate in a signed return message. Receiving and sending agents SHOULD also provide a mechanism to allow a user to "store and protect" certificates for correspondents in such a way so as to guarantee their later retrieval. 4.1 Key Pair Generation If an S/MIME agent needs to generate a key pair, then the S/MIME agent or some related administrative utility or function MUST be capable of generating separate DH and DSS public/private key pairs on behalf of the user. Each key pair MUST be generated from a good source of non-deterministic random input [RANDOM] and the private key MUST be protected in a secure fashion. If an S/MIME agent needs to generate a key pair, then the S/MIME agent or some related administrative utility or function SHOULD generate RSA key pairs. A user agent SHOULD generate RSA key pairs at a minimum key size of 768 bits. A user agent MUST NOT generate RSA key pairs less than 512 bits long. Creating keys longer than 1024 bits may cause some older S/MIME receiving agents to not be able to verify signatures, but gives better security and is therefore valuable. A receiving agent SHOULD be able to verify signatures with keys of any size over 512 bits. Some agents created in the United States have chosen to create 512 bit keys in order to get more advantageous export licenses. However, 512 bit keys are considered by many to be cryptographically insecure. Implementors should be aware that multiple (active) key pairs may be associated with a single individual. For example, one key pair may be used to support confidentiality, while a different key pair may be used for authentication. Ramsdell Standards Track [Page 24] RFC 2633 S/MIME Version 3 Message Specification June 1999 5. Security This entire memo discusses security. Security issues not covered in other parts of the memo include: 40-bit encryption is considered weak by most cryptographers. Using weak cryptography in S/MIME offers little actual security over sending plaintext. However, other features of S/MIME, such as the specification of tripleDES and the ability to announce stronger cryptographic capabilities to parties with whom you communicate, allow senders to create messages that use strong encryption. Using weak cryptography is never recommended unless the only alternative is no cryptography. When feasible, sending and receiving agents should inform senders and recipients the relative cryptographic strength of messages. It is impossible for most software or people to estimate the value of a message. Further, it is impossible for most software or people to estimate the actual cost of decrypting a message that is encrypted with a key of a particular size. Further, it is quite difficult to determine the cost of a failed decryption if a recipient cannot decode a message. Thus, choosing between different key sizes (or choosing whether to just use plaintext) is also impossible. However, decisions based on these criteria are made all the time, and therefore this memo gives a framework for using those estimates in choosing algorithms. If a sending agent is sending the same message using different strengths of cryptography, an attacker watching the communications channel may be able to determine the contents of the strongly- encrypted message by decrypting the weakly-encrypted version. In other words, a sender should not send a copy of a message using weaker cryptography than they would use for the original of the message. Modification of the ciphertext can go undetected if authentication is not also used, which is the case when sending EnvelopedData without wrapping it in SignedData or enclosing SignedData within it. Ramsdell Standards Track [Page 25] RFC 2633 S/MIME Version 3 Message Specification June 1999 A. ASN.1 Module SecureMimeMessageV3 { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) modules(0) smime(4) } DEFINITIONS IMPLICIT TAGS ::= BEGIN IMPORTS -- Cryptographic Message Syntax SubjectKeyIdentifier, IssuerAndSerialNumber, RecipientKeyIdentifier FROM CryptographicMessageSyntax { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) modules(0) cms(1) }; -- id-aa is the arc with all new authenticated and unauthenticated -- attributes produced the by S/MIME Working Group id-aa OBJECT IDENTIFIER ::= {iso(1) member-body(2) usa(840) rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) attributes(2)} -- S/MIME Capabilities provides a method of broadcasting the symetric -- capabilities understood. Algorithms should be ordered by preference -- and grouped by type smimeCapabilities OBJECT IDENTIFIER ::= {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9) 15} SMIMECapability ::= SEQUENCE { capabilityID OBJECT IDENTIFIER, parameters ANY DEFINED BY capabilityID OPTIONAL } SMIMECapabilities ::= SEQUENCE OF SMIMECapability -- Encryption Key Preference provides a method of broadcasting the -- preferred encryption certificate. id-aa-encrypKeyPref OBJECT IDENTIFIER ::= {id-aa 11} SMIMEEncryptionKeyPreference ::= CHOICE { issuerAndSerialNumber [0] IssuerAndSerialNumber, receipentKeyId [1] RecipientKeyIdentifier, subjectAltKeyIdentifier [2] SubjectKeyIdentifier } Ramsdell Standards Track [Page 26] RFC 2633 S/MIME Version 3 Message Specification June 1999 -- The Content Encryption Algorithms defined for SMIME are: -- Triple-DES is the manditory algorithm with CBCParameter being the -- parameters dES-EDE3-CBC OBJECT IDENTIFIER ::= {iso(1) member-body(2) us(840) rsadsi(113549) encryptionAlgorithm(3) 7} CBCParameter ::= IV IV ::= OCTET STRING (SIZE (8..8)) -- RC2 (or compatable) is an optional algorithm w/ RC2-CBC-paramter -- as the parameter rC2-CBC OBJECT IDENTIFIER ::= {iso(1) member-body(2) us(840) rsadsi(113549) encryptionAlgorithm(3) 2} -- For the effective-key-bits (key size) greater than 32 and less than -- 256, the RC2-CBC algorithm parameters are encoded as: RC2-CBC-parameter ::= SEQUENCE { rc2ParameterVersion INTEGER, iv IV} -- For the effective-key-bits of 40, 64, and 128, the -- rc2ParameterVersion values are 160, 120, 58 respectively. -- The following list the OIDs to be used with S/MIME V3 -- Digest Algorithms: -- md5 OBJECT IDENTIFIER ::= -- {iso(1) member-body(2) us(840) rsadsi(113549) -- digestAlgorithm(2) 5} -- sha-1 OBJECT IDENTIFIER ::= -- {iso(1) identified-organization(3) oiw(14) secsig(3) -- algorithm(2) 26} -- Asymmetric Encryption Algorithms -- -- rsaEncryption OBJECT IDENTIFIER ::= -- {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-1(1) -- 1} -- Ramsdell Standards Track [Page 27] RFC 2633 S/MIME Version 3 Message Specification June 1999 -- rsa OBJECT IDENTIFIER ::= -- {joint-iso-ccitt(2) ds(5) algorithm(8) encryptionAlgorithm(1) 1} -- -- id-dsa OBJECT IDENTIFIER ::= -- {iso(1) member-body(2) us(840) x9-57(10040) x9cm(4) 1 } -- Signature Algorithms -- -- md2WithRSAEncryption OBJECT IDENTIFIER ::= -- {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-1(1) -- 2} -- -- md5WithRSAEncryption OBJECT IDENTIFIER ::= -- {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-1(1) -- 4} -- -- sha-1WithRSAEncryption OBJECT IDENTIFIER ::= -- {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-1(1) -- 5} -- -- id-dsa-with-sha1 OBJECT IDENTIFIER ::= -- {iso(1) member-body(2) us(840) x9-57(10040) x9cm(4) 3} -- Other Signed Attributes -- -- signingTime OBJECT IDENTIFIER ::= -- {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9) -- 5} -- See [CMS] for a description of how to encode the attribute -- value. END Ramsdell Standards Track [Page 28] RFC 2633 S/MIME Version 3 Message Specification June 1999 B. References [3DES] ANSI X9.52-1998, "Triple Data Encryption Algorithm Modes of Operation", American National Standards Institute, 1998. [CERT3] Ramsdell, B., Editor, "S/MIME Version 3 Certificate Handling", RFC 2632, June 1999. [CHARSETS] Character sets assigned by IANA. See <ftp://ftp.isi.edu/in- notes/iana/assignments/character-sets>. [CMS] Housley, R., "Cryptographic Message Syntax", RFC 2630, June 1999. [CONTDISP] Troost, R., Dorner, S. and K. Moore, "Communicating Presentation Information in Internet Messages: The Content-Disposition Header Field", RFC 2183, August 1997. [DES] ANSI X3.106, "American National Standard for Information Systems- Data Link Encryption," American National Standards Institute, 1983. [DH] Rescorla, E., "Diffie-Hellman Key Agreement Method", RFC 2631, June 1999. [DSS] NIST FIPS PUB 186, "Digital Signature Standard", 18 May 1994. [ESS] Hoffman, P., Editor "Enhanced Security Services for S/MIME", RFC 2634, June 1999. [MD5] Rivest, R., "The MD5 Message Digest Algorithm", RFC 1321, April 1992. [MIME-SPEC] The primary definition of MIME. "MIME Part 1: Format of Internet Message Bodies", RFC 2045; "MIME Part 2: Media Types", RFC 2046; "MIME Part 3: Message Header Extensions for Non-ASCII Text", RFC 2047; "MIME Part 4: Registration Procedures", RFC 2048; "MIME Part 5: Conformance Criteria and Examples", RFC 2049, September 1993. [MIME-SECURE] Galvin, J., Murphy, S., Crocker, S. and N. Freed, "Security Multiparts for MIME: Multipart/Signed and Multipart/Encrypted", RFC 1847, October 1995. Ramsdell Standards Track [Page 29] RFC 2633 S/MIME Version 3 Message Specification June 1999 [MUSTSHOULD] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP14, RFC 2119, March 1997. [PKCS-1] Kaliski, B., "PKCS #1: RSA Encryption Version 2.0", RFC 2437, October 1998. [PKCS-7] Kaliski, B., "PKCS #7: Cryptographic Message Syntax Version 1.5", RFC 2315, March 1998. [RANDOM] Eastlake, 3rd, D., Crocker, S. and J. Schiller, "Randomness Recommendations for Security", RFC 1750, December 1994. [RC2] Rivest, R., "A Description of the RC2 (r) Encryption Algorithm", RFC 2268, January 1998. [SHA1] NIST FIPS PUB 180-1, "Secure Hash Standard," National Institute of Standards and Technology, U.S. Department of Commerce, DRAFT, 31May 1994. [SMIMEV2] Dusse, S., Hoffman, P., Ramsdell, B., Lundblade, L. and L. Repka, "S/MIME Version 2 Message Specification", RFC 2311, March 1998. Ramsdell Standards Track [Page 30] RFC 2633 S/MIME Version 3 Message Specification June 1999 C. Acknowledgements Many thanks go out to the other authors of the S/MIME Version 2 Message Specification RFC: Steve Dusse, Paul Hoffman, Laurence Lundblade and Lisa Repka. Without v2, there wouldn't be a v3. A number of the members of the S/MIME Working Group have also worked very hard and contributed to this document. Any list of people is doomed to omission, and for that I apologize. In alphabetical order, the following people stand out in my mind due to the fact that they made direct contributions to this document. Dave Crocker Bill Flanigan Paul Hoffman Russ Housley John Pawling Jim Schaad Editor's Address Blake Ramsdell Worldtalk 17720 NE 65th St Ste 201 Redmond, WA 98052 Phone: +1 425 376 0225 EMail: blaker@deming.com Ramsdell Standards Track [Page 31] RFC 2633 S/MIME Version 3 Message Specification June 1999 Full Copyright Statement Copyright (C) The Internet Society (1999). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society. Ramsdell Standards Track [Page 32]

[Contrib] [RFC Index] [RFC 2600 - 2699]    RFC 2633: S/MIME Version 3 Message Specification